Second-Hand Machines

12436 SAR Makina SCM 630-2 double stack pay-off

up to now used for: CU
suitable for: pay-off for bunching machines
spool flange Ø max: 630 mm
speed: 300 m/min
number of pay-off stations: 2

12433 HERBORN-BREITENBACH single drawing block

suitable for: drawing of low, high carbon wires and non ferious wires
drawing capstan Ø: 900 mm
no. of drafts: 1
electrical cabinet: non-existent
additional data: without motor

12427 NIEHOFF R 501.2.R.2.3000 continuous annealer

up to now used for: brass / Ms 63
no. of wires: 2
annealing capacity: 3000 A

12426 NIEHOFF MMH 121.E1.1.A.12 medium wire drawing line

up to now used for: brass / MS 63
no. of wires: 2
inlet wire Ø max: 3,1 mm
finished wire Ø min: 0,8 mm
additional data:
- Line consists of:
- 1 x Niehoff R 501 inline annealer which was installed after a wire rod drawing line
- 1 x dancer
- 1 x two wire inline drawing machine
- 1 x one wire medium wire annealer
- 1 x one wire dancer
- 1 x one wire automatic spooler
- 1 x Emulsion cleaning system for the whole line
- Not included in delivery is the wire rod drawing machine.
- On request the Niehoff R 501 inline annealer can be purchased separately.

NIEHOFF R 501.2.R.2.3000 continuous annealer
- up to now used for: brass / Ms 63
- no. of wires: 2
- contact roll- / pulley-Ø: 450 mm
- annealing voltage: 40 V
- annealing capacity: 3000 A
NIEHOFF T 400 dancer
NIEHOFF R 250.1.R.1000 continuous annealer
NIEHOFF VPH 200 dancer
NIEHOFF SPH 631.1.G.E.A automatic spooler
- up to now used for: brass / Ms 63
- wire Ø min: 0,8 mm
- wire Ø max: 1,2 mm
- spool flange Ø max: 630 mm
- spool revolutions: 1213 min⁻¹
APROCHIM A14/NP/CL-ME emulsion cleaning system

12425 VEB Grüna UDSpE I pointing machine

up to now used for: Cu
material Ø min: 1 mm
material Ø max: 8 mm
string-on device: existent

12423 steel spool

no.: 25
spool flange Ø: 710 mm
spool core Ø: 360 mm
total spool width: 520 mm
spool bore Ø: 127 mm

12405 EUROBEND MELC 16x3 CNC wire straightening and cutting machine

suitable for: straightening and cutting of cold and hot rolled Material from coil true hyperbolically profiled, high quality steel rollers
wire Ø min: 6 mm
wire Ø max: 16 mm
speed max: 240 m/min
outlet table length: 12000 mm

EUROBEND pay-off
EUROBEND pay-off
EUROBEND pay-off

12399 HERBORN H 750-5 wet-type wire drawing line

suitable for: round and profile wires, for sample trolley wires
no. of drafts: 5
inlet wire Ø max: 20 mm
finished wire Ø max: 16 mm
finished wire Ø min: 5 mm

STOLBERGER WHP 20 take-up

12398 SKET UDS 800 single spooler

up to now used for: steel wire
technical condition: Very good (as new), machine was overhauled in year 2015 and equipped with new electrics (in production 5 months).
wire Ø min: 0,2 mm
spool flange Ø max: 800 mm
speed max: 12 m/s

Schaltschrank zu Einzelspuler 12398

12372 rewinding line

up to now used for: steel wire
suitable for: rewinding from coils to stranding spools
wire Ø min: 0,27 mm
wire Ø max: 1,2 mm
spool flange Ø max: 250 mm

pay-off

12371 rewinding line

up to now used for: steel wire
suitable for: rewinding from coils to stranding spools
wire Ø min: 0,27 mm
wire Ø max: 1,2 mm
spool flange Ø max: 250 mm

pay-off

12366 LÄMNEA BRUK SBFV 800 take up with 18 stations

suitable for: coiling of galvanized wires with tensile strength up to 1.000 N/mm²
no. of coiling stations: 18
material Ø min: 1,4 mm
material Ø max: 3,55 mm
Ø of coiling capstan: 800 mm

12363 ROSENDAHL RUL 1S FU rewinding line

cable Ø: 1,5 - 3,5 mm
spool flange Ø max: 800 mm
total spool width max: 600 mm
examples of production: Product range max flat material: 7,0 mm
speed max: 300 m/s

ROSENDAHL pay-off (integrated)
ROSENDAHL take-up (integrated)

12362 NEXANS BA 60 haul-off capstan

up to now used for: insulated cores
belt width max: 120 mm
contact length: 1500 mm
speed max: 60 m/min

12351 WAFIOS STH 2 barbed wire machine

wire Ø min: 1,5 mm
wire Ø max: 2,8 mm
barb spacing min: 60 mm
barb spacing max: 152,4 mm
capacity (barbs/min): 460 max

12334 GSG ÜKA pay-off tower

wire Ø min: 5,5 mm
no. of tiltable pay-offs: 1
tower height: 7000 mm
additional data: Unit consists of:
1 x pay off tower with crane
1 x Hydraulic tiltable cone
1 x Hydraulic agregate

12319 NIEHOFF M 200.2.A.2121 intermediate wire drawing machine

up to now used for: Cu
no. of drafts: 21
inlet wire Ø max: 1,4 mm
finished wire Ø min: 0,127 mm
speed max: 30 m/s

NIEHOFF VG 10.2.R.400 continuous annealer
NIEHOFF SG 145.2.F.2.E single spooler

12311 GSG RWB 400/4 brush descaler

wire Ø min: 5,5 mm
wire Ø max: 18 mm
no. of brushes: 4 x 2 (Paare)
brush Ø: 400 mm

12292 BONGARD TS static coiler

up to now used for: Cu
suitable for: for coiling of bare and tinned copper. Due to the renewed special coiling head design from year 2002, the coiler can be used for tinned wires.
material Ø min: 1,2 mm
material Ø max: 2 mm
speed max: 12 m/s

12289 NIEHOFF MZE 201 multiwire drawing line

no. of wires: 8 (2x4)
inlet wire Ø max: 2,03 mm
finished wire Ø max: 0,5 mm
finished wire Ø min: 0.15 mm
speed max: 30 m/s

NIEHOFF VG 30.M.1.W.1500 continuous annealer
NIEHOFF S 630.2.F.3.E spooler