Second-Hand Machines

13759 SAMP MT6 8+8.37 multiwire drawing line

up to now used for: copper bare and thinned
no. of wires: 16
inlet wire Ø max: 1,55 mm
finished wire Ø max: 0,15 mm
finished wire Ø min: 0,05 mm

SAMP R12 continuous annealer
SAMP TE/63-N single spooler
SAMP TE/63-N single spooler
SAMP electrical cabinet
filtration unit for continuous annealer
filtration unit for drawing machine

13755 SAMP MT6/7+7/37 multiwire drawing line

no. of wires: 14
no. of drafts: 37
inlet wire Ø max: 1,56 mm
finished wire Ø max: 0,159 mm
finished wire Ø min: 0.05 mm

SAMP continuous annealer
SAMP TE/65-M single spooler
SAMP electrical cabinet

13729 KOCH KGT 28/4 drawing line for smooth and ribbed wire

suitable for: drawing of low and high carbon steel wire as well suitable for drawing and ribbing of wire
inlet wire Ø max: 7,5 mm
finished wire Ø max: 7 mm
finished wire Ø min: 3 mm
no. of drafts: 4

PITTINI DVM pay off tower with 2 tiltable pay off beams
descaler
KOCH powder coating
KOCH KHS 1250 single spooler

13728 SCHLATTER MG 316 mesh welding machine

line wire Ø min: 3 mm
line wire Ø max: 8,5 mm
cross wire Ø max: 8,5 mm
strokes (cross wire) min / max: max. 120
no. of line wires max: 24

13726 STRECKER 1A butt welding machine

wire Ø Cu min: 1,5 mm
wire Ø Cu max: 5 mm
wire Ø Al min: 2,5 mm
wire Ø Al max: 8 mm
wire Ø steel min: 1,5 mm

13725 STRECKER 1A butt welding machine

wire Ø Cu min: 1,5 mm
wire Ø Cu max: 5 mm
wire Ø Al min: 2,5 mm
wire Ø Al max: 8 mm
post-annealing facility: existent

13724 KROLLMANN manual pointing machine

material Ø min: 0,8 mm
material Ø max: 2,5 mm
no. of calibres: 13
roll arrangement: horizontal

13718 NEXTROM 4 pair Group Twinner with back twist and singlet twist Cabler

suitable for: Produktion von LAN Kabel, CAT5, CAT6, CAT7
additional data:
- Line consists of:
- 1 x 4head double-twist group stranding machine with reversing frame with 45-degree inclination
- Year of construction: 2000
- Outer spool diameter: 560 mm
- total spool width: 425 mm
- Spool core diameter: 280 mm
- Spool bore: 127 mm
- Copper wire diameter: 0.32 mm - 0.65 mm (AWG 28-22)
- Max. Diameter of the insulated conductor: 1.65 mm
- Max. bow speed: 1800 rpm (3600 twists per minute for category 5 cable)
- Max. Line speed: 90 m/min
- Reverse rotation drive: 3.7 kW
- 1 x turnstile and stand
- Year of construction: 2000
- 18-inch belt winding turnstile
- Drive: 1.5 kW
- Pull-off force: 15 kg
- 2 x belt pay off capstan
- Manufactur: Setic
- Type: CRT 350 RN1M
- Year of Manufacture: 2012
- 1 x quadruple longitudinal tape discharge
- Year of construction: 2000
- Belt cushion diameter: 400 mm
- Bore: 76 mm
- Belt pad width: 400 mm cross-wound
- belt width: 7-15 mm
- Tape thickness: 0.012-0.075 mm
- Tape tension: 5-60 N
- 1 x preTwister
- Type: CRT350RN1M
- Manufacturer: Setic
- Year of manufacture: 2012
- 1 x single lay stranding machine
- Year of construction: 2000
- Reel diameter: 1000 mm
- Total width: 625 mm
- Coil core diameter: 500 mm
- Coil bore: 127 mm
- Max. reel weight: 600 kg
- Max. Cable diameter: 10 mm
- Max. Speed: 900 rpm
- Tensile force: 20-200 N
- Flyer drive: 45 KW 1800 rpm A.C. vector drive
- Reel drive: 37 KW 1500 rpm A.C. vector drive
- Traverse drive: 3.7 KW 1500 rpm A.C. vector drive