Second-Hand Machines

14266 EVG QC 7/126-PV High flexible mesh welding line

line wire Ø min: 4 mm
cross wire Ø max: 12 mm
strokes (cross wire) min / max: 100
mesh width max: 3300 mm
no. of line wires max: 28

14264 KROLLMANN pointing machine

up to now used for: low and high carbon steel wire
material Ø min: 1,5 mm
material Ø max: 5,5 mm
no. of calibres: 14

14263 KROLLMANN SWG-4/S/F pointing machine

material Ø min: 1,6 mm
material Ø max: 6,5 mm
no. of calibres: 13
roll arrangement: vertical

14262 KROLLMANN SWG-4/S/F pointing machine

up to now used for: low and high carbon steel wire
material Ø min: 1,6 mm
material Ø max: 6,5 mm
no. of calibres: 13
roll arrangement: vertical

14261 KISTNER rotating pay-off

number of pay-off stations: 1
pay-off turn table driven: yes

14260 KROLLMANN DWU 6/S pointing machine

up to now used for: steel wire
material Ø min: 10 mm
material Ø max: 21 mm
no. of calibres: 7
roll arrangement: horizontal and vertical

14259 WAFIOS FMU1 Spring winding machine

suitable for: Manufacture of leaf springs
technical condition: Installed, in production/ new gearbox installed in 2023/ new PC and PC monitor in 2022
spring wire Ø: 0,3 - 1,5 mm

14246 NIEHOFF M 85 11 A rod breakdown drawing line

suitable for: drawing of Cu, CuZn30, CuZn36, CuSn6, CuSn8 (Brass aloy)
inlet wire Ø max: 8 mm
finished wire Ø max: 4,5 mm
finished wire Ø min: 0,9 mm

HERBORN SL 1000 Spool pay off
- reel flange Ø max: 1000 mm
pay off Station for Wire rod coils
NIEHOFF Dancer for Anealer
NIEHOFF R501.3.R.1.8000 continuous annealer
NIEHOFF T 400 Dancer for Calibriation draft
NIEHOFF VAB 450 Calibration draft
NIEHOFF Dancer for Spooler
NIEHOFF SL 1250 / 1 CE single spooler
RESY KBF 802 / 1040 WAB/RF Filtration unit for anealer
NIEHOFF Electric cabinet for anealer
NIEHOFF Electric cabinet for drawing machine
Electric cabinet for spool pay off

14240 NIEHOFF DSA4 rewinding line for braiding spools

up to now used for: CU bare and thinned (16x0,05 - 6x0,30 mm)
wire Ø min: 0,05 mm
spool flange Ø max: 80 mm
total spool width max: 100 mm
speed max: 600 m/min

NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off

14235 NIEHOFF DSA4 rewinding line for braiding spools

suitable for: Possible materials: CU, AL, Fe, stainless steel, textile
no. of spool reception: 4
wire Ø min: 0,05 mm
spool flange Ø max: 80 mm
speed max: 600 m/min

NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off

14226 FRIGERIO Low Relaxation Line for PC Strand

total no. of bobbins: 1+6
spool flange Ø max: 1120 mm
examples of production: Strand configurations:
1+6
3-strand

Diameter: ¼“ - 5/16” – 3/8“ – 7/16” – ½“ – 6/10” – 7/10" – 6.9 mm
speed max: 135 m/min

FRIGERIO Spool pay off for Bow stranding machine (core wire)
FRIGERIO XN 112 bow stranding machine
FRIGERIO First Double Pulling Capstan
ATE movable induction furnance
FRIGERIO cooling trough
FRIGERIO Second Double Pulling Capstan
FRIGERIO AST 25 Double Take / Pay off Unit
FRIGERIO BSS 19 Double Layer Wind Spooler

14221 FRIGERIO RI 120/9-SX2 PC wire straight line drawing machine

up to now used for: High carbon steel wire (PC wire) with 0,83-0,90% Carbon
no. of drafts: 9
inlet wire Ø max: 13 mm
finished wire Ø max: 5,6 mm
drawing capstan Ø: 1200 mm

FRIGERIO SVO 30 horizontal wire rod pay off with flyer
M6-GR900 Dust extraction system
FRIGERIO BU 125 single spooler
electrical cabinet

14220 EVG STU 16 Stretching unit

up to now used for: cold and hot rolled material
suitable for: mechanical decaling and or stretching of cold and hot rolled steel wire
wire Ø max: 16 mm
no. of rolls: 10
additional data: Adjustment roller: hydraulic

14209 FRIGERIO Low Relaxation Line for PC Strand

single wire Ø min: 2,6 mm
single wire Ø max: 6,24 mm
finished rope Ø min: 6,9 mm
final rope Ø max: 18,3 mm
additional data: Production Sample:
Diameter / KG / Strand Pitch / Speed m/min / Skip RPM / Prod. Kg/h
5/16" 0,314 111 88 800 1650
3/8" 0,415 133 106 800 640
1/2" 0,730 178 120 670 5250
6/10" 1,185 213 79 370 5600
7/10" 1,592 250 60 240 5700

TROESTER LAFR 2225/13 traversing take-up
- up to now used for: steel rops (PC ropes)
- technical condition: as new
- material Ø max: 20 mm
- reel flange Ø max: 2200 mm
- total reel width min: 1340 mm
FRIGERIO Spool pay off for Bow stranding machine (core wire)
FRIGERIO XN 112 bow stranding machine
FRIGERIO First Double Pulling Capstan
ATE Mobile Induction Fournace
FRIGERIO cooling trough
FRIGERIO Second Double Pulling Capstan
FRIGERIO AST 25 Double Take / Pay off Unit
FRIGERIO BSS 17 Layer Wind Spooler
electrical cabinet

14199 NIEHOFF DSA4 rewinding line for braiding spools

up to now used for: CU bare and thinned (16x0,05 - 6x0,30 mm)
no. of spool reception: 4
spool flange Ø max: 80 mm
speed max: 600 m/min

NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off
NIEHOFF ARP630.2.6.P.TE pay-off

14196 CEECO 1+6+12+18+24/630 Rigid Stranding line

up to now used for: CU, AL
spool flange Ø max: 630 mm
single wire Ø min: 1,35 mm
single wire Ø max: 4,5 mm
cross section of core max: 1000 mm²

14185 ROGO 2 time vertical PTFE Sintering line

up to now used for: PTFE
suitable for: A vertical PTFE sintering furnace system is an industrial furnace system specifically designed to process PTFE (polytetrafluoroethylene, commonly known as Teflon) using the sintering process
cable Ø max: 4 mm
speed max: 65 m/min

KURRE AUF-W-1000-30-T-30-L pay-off
KDWW-800-30-st-0-L pay-off
RUDOLF und KOSCHINSKI vaporize oven
ROGO Doppel-Sinterofen
LEIMBACH CDH05A double take-up
LEIMBACH dancer
LEIMBACH CSH05 take-up

14179 HAGEN & FUNKE horizontal PTFE sinter oven line

up to now used for: PTFE
suitable for: A horizontal PTFE sintering furnace system is an industrial furnace system specifically designed to process PTFE (polytetrafluoroethylene, commonly known as Teflon) using the sintering process
cable Ø min: 3 mm
cable Ø max: 10 mm

HAGEN & FUNKE A6-12 pay-off
HAGEN & FUNKE dancer
HAGEN & FUNKE 10553 Sinterofen
HAGEN & FUNKE RA30-600 haul-off caterpillar
HAGEN & FUNKE W6-12 take-up

14107 RUDOLF und KOSCHINSKI extrusion line

up to now used for: PTFE
suitable for: up to now used for the production of 1,5 - 3,0 mm PTFE Cables
screw Ø: 64 (2,5 Zoll) mm

RUDOLF und KOSCHINSKI AW630 pay-off
RUDOLF und KOSCHINSKI T-800-200 dancer
RUDOLF und KOSCHINSKI PEX 64 extruder
RUDOLF und KOSCHINSKI VAP60 vaporize oven
RUDOLF und KOSCHINSKI SI-11-600 Sintering line
cooling trough
SIKORA CENTERVIEW 8010 excenter measuring device
SIKORA LASER 2010 XY-Final dimension thickness measuring device
SIKORA SPARK 2030 UL spark tester
SIKORA lump detector
RUDOLF und KOSCHINSKI AUW360 take-up

14083 RUDOLF und KOSCHINSKI extrusion line

up to now used for: PTFE
suitable for: up to now used for the production of 1,5 - 3,0 mm PTFE Cables
screw Ø: 64 (2,5 Zoll) mm

RUDOLF und KOSCHINSKI AW630 pay-off
RUDOLF und KOSCHINSKI dancer
RUDOLF und KOSCHINSKI extruder
RUDOLF und KOSCHINSKI vaporize oven
RUDOLF und KOSCHINSKI Sintering line
cooling trough
ZUMBACH AST 15 HF.12.60.C spark tester
ZUMBACH KW32 TRIO/DP lump detector
ZUMBACH ODAC 18XY-DP thickness measuring device
SIKORA CENTERVIEW 8010 excenter measuring device
RUDOLF und KOSCHINSKI AUW360 take-up