Second-Hand Machines

12900 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 integrated single spooler

12898 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 integrated single spooler

12896 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 integrated single spooler

12894 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 integrated single spooler

12888 SAMP BM 630 DB double twist bunching machine

twists per minute: 6000
technical condition: electric in year 2014 new
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
speed max: 300 m/min

SAMP electrical cabinet

12886 SAMP BM 630 DB double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12884 SAMP BM 630 D double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12882 SAMP BM/630-D double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12877 SKET SR 18x200 tubular strander

spool flange Ø max: 200 mm
single wire Ø min: 0,3 mm
single wire Ø max: 1 mm
lay length max: 81,5 mm
rotor revolutions: 1.500 min⁻¹

SKET pay-off
SKET haul-off capstan
SKET take-up
SKET electrical cabinet

12872 SKET SRN 6x400 tubular strander

spool flange Ø max: 400 mm
single wire Ø min: 0,8 mm
single wire Ø max: 2 mm
final rope Ø max: 10 mm
rotor revolutions: 1.400 min⁻¹

SKET pay-off
SKET double haul-off capstan
SKET take-up
SKET electrical cabinet

12859 KISTNER rewinding line

no. of spool reception: 12
wire Ø min: 1 mm
wire Ø max: 2 mm
spool flange Ø max: 800 mm
speed max: 120 m/min

KISTNER HA 800/12 pay-off, 12 stations
KISTNER HS 800/12 take-up, 12 stations
electrical cabinet

12855 pointing machine

up to now used for: low carbon and high carbon steel wire
material Ø max: 5,5 mm
no. of calibres: 13
roll arrangement: horizontal

12854 GSG WBE brush descaler

wire Ø min: 5,5 mm
wire Ø max: 12 mm
no. of brushes: 4
brush Ø: 250 mm
feeding speed max: 4 m/s

12852 PEKA pay-off tower

up to now used for: low carbon wire
suitable for: For unwinding wires. The pay-off is equipped with a crane so that the deflection roller can be lowered during the wire drawing-in process.
number of pay-off stations: 1
tower height: 4300 mm

12851 PEKA pay-off tower

up to now used for: low carbon wire
suitable for: For unwinding wires. The pay-off is equipped with a crane so that the deflection roller can be lowered during the wire drawing-in process.
number of pay-off stations: 1
tower height: 4300 mm

12827 SPIRKA DF 16 A braider

wire Ø min: 0,05 mm
type of operation: vertical
no. of pay-off bobbins: 16
coil section: 0,02 - 0,30 mm²
additional data: Braided weave: 2:2
Centre passage: -Ø15 mm
Maximum speed: 150 rpm
Spools: S1,-Ø75/23 x 100/50 mm, plastic, without snap ring
Motor power pay off capstan: 0.37 kW
Thread cut-off: yes
Single wire cut-off: yes
Metre counter: yes
Top bobbin carrier: DF16-550D
Bobbin carrier bottom: DF16-550E

KURRE KDWW-450/800-30/30 take-up and pay-off

12822 WAFIOS VDF 80 chain link fencing machine

suitable for: In production:
Wire Ø 1.80 - 2.40 mm
Braiding width: 0.8 - 2.0 m
technical condition: Retrofit 2005
pitch max: 80 mm
pitch: 50 mm
weaving width max: 2000 mm

WAFIOS take-up

12799 steel spool

spool flange Ø: 630 mm
spool core Ø: 355 mm
spool useful width: 400 mm
total spool width: 475 mm
spool bore Ø: 127 mm

12792 HAGEN & FUNKE DÜKA 630 double overhead-type pay-off

up to now used for: copper wire
spool flange Ø max: 630 mm
number of pay-off stations: 2
pay-off turn table driven: yes

12791 LESMO DTO-1000-CM double twist bunching machine

up to now used for: Cu
twists per minute: max. 3200
take-up spool flange Ø: 1000 mm
cable Ø max: 15 mm
lay length max: 300 mm