manufacturer "KOCH"
12744 KOCH KGT 800/12 straight-line wire drawing machine
- no. of drafts: 12
- technical condition: without electric cabinet, against aditional cost line can be delivered mechanical overhauled including new electrics and with commisioning
- inlet wire Ø max: 5 mm
- finished wire Ø max: 1,3 mm
- finished wire Ø min: 0,78 mm
- KOCH pay-off
- KOCH dancer
- KOCH KHS 800 S single spooler
12740 KOCH KGT 800/12 straight-line wire drawing machine
- inlet wire Ø max: 4 mm
- finished wire Ø max: 1,3 mm
- finished wire Ø min: 0,78 mm
- number of blocks: 12
- drawing capstan Ø: 450 mm
- KOCH pay-off
- KOCH dancer
- KOCH KHS 800 S single spooler
12546 KOCH cold rolling line
- inlet wire Ø max: 14 mm
- inlet wire Ø min: 5,5 mm
- finished wire Ø max: 12 mm
- finished wire Ø min: 3,8 mm
- speed max: 10 m/s
- GSG overhead-type pay-off
- RENTRA mechanical descaler
- BSG TF powder coating
- KOCH KEB 6300/D double drawing block
- KOCH KSS 1250 A/N double spooler
12544 KOCH KHS 1250-S traversing single spooler
- wire Ø min: 10 mm
- wire Ø max: 25 mm
- spool flange Ø max: 1250 mm
- speed max: 150 m/min
-
additional data:
with traversing (motorised rollers)
with guide roller console with traversing pulley (electrically height-adjustable)
with attached hydraulic unit
with 1 x divisible bobbin
with bobbin ejection device (hydraulic)
with spool push-off device (hydraulic)
with hydraulic wire clamping and cutting device
without touch panel
without electric cabinet
- divisible bobbin
12227 KOCH KSA spool pay-off
- spool flange Ø max: 1000 mm
- total spool width max: 800 mm
- motor power: 15 kW
- motor revolutions: 500 min⁻¹
11939 KOCH CAM 25 D double horizontal pay-off
- wire Ø max: 25 mm
- number of pay-off stations: 2
-
additional data:
Mandral length: 2.000 mm
Number of Coils: 2 (1x in working position, 1x in loading(unloading position).
pay off: 180° rotating
Unbending pintch roll-Ø: 180 mm
Pintch roll drive: 2 x DC motors
with straightening unit (hydraulic adjustable)
number of rolls straightener: 2 + 3 (roll-Ø 130 mm)
11318 KOCH KGT 800-E single drawing block
- up to now used for: low carbon wire
- inlet wire Ø max: 2.6 mm
- finished wire Ø min: 0.9 mm
- drawing capstan Ø 1. die: 450 mm
- motor power: 7,5 kW
- pay-off
- compacting / tying machine
11317 KOCH KGT 800-E single drawing block
- up to now used for: low carbon wire
- inlet wire Ø max: 2.6 mm
- finished wire Ø min: 0.9 mm
- drawing capstan Ø 1. die: 450 mm
- motor power: 7,5 kW
- pay-off
- compacting / tying machine
11032 KOCH KEWS IV goose neck coiler
- up to now used for: low carbon wire
- material Ø min: 3 mm
- material Ø max: 8 mm
- Ø of coiling capstan: 900 mm
- speed max: 4 m/s
10948 KOCH KHS 1000 single spooler
- wire Ø max: 8 mm
- spool flange Ø max: 1000 mm
- useful spool width max: 630 mm
- speed max: 6 m/s
10837 KOCH KHZ 4500 straight-line wire drawing machine
- up to now used for: Steel wire with 350 N/mm² strength
- no. of drafts: 3
- inlet wire Ø max: 17 mm
- finished wire Ø min: 7 mm
- drawing capstan Ø: 1 x 900/740 / 1 x 900 mm
- horizontal pay-off
- KOCH KHZ 4500 double drawing block
- KOCH KRE-1 wire pulling device
- KOCH KHZ 4500 single drawing block
- KOCH KRE-1 wire pulling device
- KOCH KHS 1250-S traversing single spooler
- spool tilting device
- Auffangkorb mit Stripperkorb
9612 KOCH GDZ 125 intermediate wire drawing machine
- up to now used for: low carbon and high carbon steel wire
- no. of drafts: 17
- inlet wire Ø max: 2 mm
- finished wire Ø min: 0.25 mm
9611 KOCH GDZ 125 intermediate wire drawing machine
- up to now used for: low carbon and high carbon steel wire
- no. of drafts: 17
- inlet wire Ø max: 2 mm
- finished wire Ø min: 0.25 mm
- number of cones: 2
9609 KOCH GDZ 125 intermediate wire drawing machine
- up to now used for: low carbon and high carbon steel wire
- no. of drafts: 17
- inlet wire Ø max: 2 mm
- finished wire Ø min: 0.25 mm
- number of cones: 2
9043 KOCH KRT-E 1000 single drawing block
- up to now used for: Superconductivity
- drawing force: 100 kg
- inlet wire Ø max: 5.5 mm
- drawing capstan Ø 1. die: 600 mm
- motor power: 31,2 kW
- PLEUGER take-up
7077 KOCH KEWS 2 static coiler
- up to now used for: low carbon and high carbon steel wire
- no. of coiling stations: 1
- Ø of coiling capstan: 500 mm
- shaft of coiling capstan: horizontal