Type "Pay-Offs"
12852 PEKA pay-off tower
12851 PEKA pay-off tower
12792 HAGEN & FUNKE DÜKA 630 double overhead-type pay-off
- up to now used for: copper wire
- spool flange Ø max: 630 mm
- number of pay-off stations: 2
- pay-off turn table driven: yes
12479 Migro ÜKA 2 pay-off with 2 hydraulic pay-off beams
- up to now used for: Cold and hot rolled wire rod
- wire Ø min: 5,5 mm
- wire Ø max: 16 mm
- no. of tiltable pay-offs: 2
- tower height: 9700 mm
12447 SAMP SV 800 DM pay-off
- suitable for: suitable for unwinding of wires in the range of 0,34 mm² - 2,50 mm²
- spool flange Ø max: 800 mm
- spool flange Ø min: 630 mm
- total spool width max: 600 mm
- speed: 300 m/min
12445 SAMP SV 630 DM pay-off
- up to now used for: Cu wire
- suitable for: suitable for unwinding of wires in the range of 0,34 mm² - 2,50 mm²
- spool flange Ø max: 630 mm
- pay-off control: dancer controlled
12436 SAR Makina SCM 630-2 double stack pay-off
- up to now used for: CU
- suitable for: pay-off for bunching machines
- spool flange Ø max: 630 mm
- speed: 300 m/min
- number of pay-off stations: 2
12334 GSG ÜKA pay-off tower
- wire Ø min: 5,5 mm
- no. of tiltable pay-offs: 1
- tower height: 7000 mm
-
additional data:
Unit consists of:
1 x pay off tower with crane
1 x Hydraulic tiltable cone
1 x Hydraulic agregate
12269 HARBOUR YZFX rotating pay-off
- up to now used for: high carbon steel wire
- suitable for: unwinding of wire rod coils ( 2x2.500 kg) infront of drawing machines
- wire Ø min: 5,5 mm
- wire Ø max: 14 mm
- coil weight: 2 x 2.500 kg
12268 HARBOUR YZFX rotating pay-off
- up to now used for: high carbon steel wire
- suitable for: unwinding of wire rod coils ( 2x2.500 kg) infront of drawing machines
- wire Ø min: 5,5 mm
- wire Ø max: 14 mm
- coil weight: 2 x 2.500 kg
12257 LUKAS AABT 250-60/2-800/3 double stack pay-off
- up to now used for: flexible conductor
- spool flange Ø max: 800 mm
- spool flange Ø min: 630 mm
- number of pay-off stations: 2
12256 LUKAS AABT 250-60/2-800/3 double stack pay-off
- up to now used for: flexible conductor
- spool flange Ø max: 800 mm
- spool flange Ø min: 630 mm
- number of pay-off stations: 2
12227 KOCH KSA spool pay-off
- spool flange Ø max: 1000 mm
- total spool width max: 800 mm
- motor power: 15 kW
- motor revolutions: 500 min⁻¹
11939 KOCH CAM 25 D double horizontal pay-off
- wire Ø max: 25 mm
- number of pay-off stations: 2
-
additional data:
Mandral length: 2.000 mm
Number of Coils: 2 (1x in working position, 1x in loading(unloading position).
pay off: 180° rotating
Unbending pintch roll-Ø: 180 mm
Pintch roll drive: 2 x DC motors
with straightening unit (hydraulic adjustable)
number of rolls straightener: 2 + 3 (roll-Ø 130 mm)
11838 HERBORN driven pay-off unit
- coil outside Ø: 1.650 max mm
- coil inside Ø: 540 - 760 mm
- coil height max: 950 mm
10743 BEMA SV2PM2S pay-off tower
- up to now used for: low carbon and high carbon steel wire
- wire Ø min: 3.5 mm
- wire Ø max: 8.5 mm
- tower height: 5800 mm