fabricant "WAFIOS"
12820 WAFIOS DF 32 machine pour treillis de simple torsion
- matériel travaillé jusqu'à présent: low carbon galvanised and PVC coatet
-
approprié pour:
Up to now used for:
Mesh width from: 0.50 m to 2.50 m
Spacing: 50 mm
Wire-Ø galvanised: 1.80 mm - 2.40 mm.
PVC-coated wire-Ø: 2.40 mm - 3.00 mm.
Length of compacted roll up to 30 metres - Ø fil min: 1.5 mm
- Ø fil max: 3.1 mm
- largeur de treillis max: 2000 mm
- WAFIOS AFD250 compact coil take-up
12712 WAFIOS R 7/50 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1,5 mm
- Ø fil max: 7 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 5000 mm
12711 WAFIOS R 51 B machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wires smoth and ribbed
- Ø fil min: 5.6 mm
- Ø fil max: 15 mm
- vitesse max: 120 m/min
- longueur de la table de sortie: 6000 mm
12471 WAFIOS R 1 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.500 n/mm²
- Ø fil min: 0,5 mm
- Ø fil max: 2,2 mm
- vitesse max: 35 m/min
- longueur de la table de sortie: 2000 mm
12468 WAFIOS RS 41 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wires
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- longueur de coupe: 200 - 6000 mm
- vitesse max: 130 m/min
12465 WAFIOS R 7/50 machine à dresser et couper
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- longueur de coupe: 200 - 3000 mm
12464 WAFIOS R 7/50 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- longueur de coupe: 200 - 4000 mm
12463 WAFIOS R 4/45 machine à dresser et couper
- matériel travaillé jusqu'à présent: high carbon steel wire
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1,2 mm
- Ø fil max: 4 mm
- longueur de coupe: 100 - 3000 mm
12462 WAFIOS R 2 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1 mm
- Ø fil max: 4 mm
- longueur de coupe: 100 - 4000 mm
- vitesse max: 70 m/min
11839 WAFIOS RF 3 machine à dresser et couper
- état technique: good, clutch require repair
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- vitesse max: 90 m/min
11772 WAFIOS R 10-60 machine à dresser et couper
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 2000 mm
11771 WAFIOS R 10-60 machine à dresser et couper
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 6000 mm
11766 WAFIOS AFK 1 enrouleur pour machine à tresser carrée
- approprié pour: Enrouleur pour le rebobinage de tresses carrées, adapté à un métier à tresses carrées pour la production de rouleaux compactés
- largeur de treillis max: 2000 mm
11525 WAFIOS BMS 5 cintreuse à deux têtes
- inlet speed max: 72 m/min
- Ø fil min: 4 mm
- Ø fil max: 10 mm
- longueur barre max: 4000 mm
- WAFIOS AHL 43-B dévidoir
10800 WAFIOS REL 3 machine à dresser et couper
- Ø fil min: 1.6 mm
- Ø fil max: 6 mm
- longueur de coupe: 450 cm
- longueur de la table de sortie: 450 mm
10797 WAFIOS RS 41 machine à dresser et couper
- Ø fil min: 1.6 mm
- Ø fil max: 6 mm
- longueur de coupe: 1.000 mm
- longueur de la table de sortie: 1.000 mm
9870 WAFIOS ligne de rebobinage
- matériel travaillé jusqu'à présent: fil de fer
- approprié pour: pour rembobiner des anneaux aux bobines
- no. de reception de bobine: 3
- Ø joue max: 120 mm
- largeur totale max: 240 mm
9869 WAFIOS ligne de rebobinage
- matériel travaillé jusqu'à présent: fil de fer
- approprié pour: pour rembobiner des anneaux aux bobines
- no. de reception de bobine: 3
- Ø joue max: 120 mm
- largeur totale max: 240 mm
9771 WAFIOS R 41 machine à dresser et couper
- matériel travaillé jusqu'à présent: fil de fer de construction
- Ø fil min: 4 mm
- Ø fil max: 8 mm
- longueur de la table de sortie: 3.000 mm
- cisailles fixe: disponible
9769 WAFIOS RS 4 machine à dresser et couper
- matériel travaillé jusqu'à présent: fil de fer de construction
- Ø fil min: 4 mm
- Ø fil max: 10 mm
- vitesse max: 120 m/min
- longueur de la table de sortie: 3.000 mm