Type "Dresseuses / Dresseuses et Coupeuses"
12756 VITARI NR 221 machine à dresser et couper
- matériel travaillé jusqu'à présent: fil d'acier doux et dur
- longueur de coupe min: 180 mm
-
example de production:
Wire Ø 3.00 - 7.00 mm up to 800 N/mm² strength
Wire Ø 3.00 - 6.00 mm 800 N/mm² - 1,200 N/mm² Strength
Wire Ø 3.00 - 5.00 mm over 1,200 N/mm² Strength - vitesse max: 120 m/min
- longueur de la table de sortie: 5000 mm
- VITARI PM 2000 dévidoir
12712 WAFIOS R 7/50 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1,5 mm
- Ø fil max: 7 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 5000 mm
12471 WAFIOS R 1 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.500 n/mm²
- Ø fil min: 0,5 mm
- Ø fil max: 2,2 mm
- vitesse max: 35 m/min
- longueur de la table de sortie: 2000 mm
12468 WAFIOS RS 41 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wires
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- longueur de coupe: 200 - 6000 mm
- vitesse max: 130 m/min
12467 DEITERS Dde machine à dresser et couper
- matériel travaillé jusqu'à présent: high carbon steel wire
- Ø fil min: 6 mm
- Ø fil max: 12 mm
- longueur de coupe: 150 - 3150 mm
- vitesse max: 80 m/min
12466 SMITH 2000/8 machine à dresser et couper
- matériel travaillé jusqu'à présent: high carbon steel wire
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 2 mm
- Ø fil max: 7 mm
- longueur de coupe: 100 - 4000 mm
12465 WAFIOS R 7/50 machine à dresser et couper
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- longueur de coupe: 200 - 3000 mm
12464 WAFIOS R 7/50 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- longueur de coupe: 200 - 4000 mm
12463 WAFIOS R 4/45 machine à dresser et couper
- matériel travaillé jusqu'à présent: high carbon steel wire
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1,2 mm
- Ø fil max: 4 mm
- longueur de coupe: 100 - 3000 mm
12462 WAFIOS R 2 machine à dresser et couper
- approprié pour: straightening and cutting of low up to high carbon steel wire with max. tensile strength of 2.000 N/mm²
- Ø fil min: 1 mm
- Ø fil max: 4 mm
- longueur de coupe: 100 - 4000 mm
- vitesse max: 70 m/min
12405 EUROBEND MELC 16x3 CNC machine à dresser et couper
- approprié pour: straightening and cutting of cold and hot rolled Material from coil true hyperbolically profiled, high quality steel rollers
- Ø fil min: 6 mm
- Ø fil max: 16 mm
- vitesse max: 240 m/min
- longueur de la table de sortie: 12000 mm
- EUROBEND dévidoir
- EUROBEND dévidoir
- EUROBEND dévidoir
11839 WAFIOS RF 3 machine à dresser et couper
- état technique: good, clutch require repair
- Ø fil min: 1.5 mm
- Ø fil max: 7 mm
- vitesse max: 90 m/min
11810 OMSDELISI machine à dresser et couper
- Ø fil min: 6 mm
- Ø fil max: 14 mm
- longueur de la table de sortie: 10000 mm
11795 KROLLMANN TVA-20 unité de redressement entraînée
- approprié pour: pour predressé et alimenter fil en acier
- Ø fil min: 6 mm
- Ø fil max: 18 mm
- résistance du matériel: 800 N/mm²
11772 WAFIOS R 10-60 machine à dresser et couper
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 2000 mm
11771 WAFIOS R 10-60 machine à dresser et couper
- Ø fil min: 3 mm
- Ø fil max: 10 mm
- vitesse max: 80 m/min
- longueur de la table de sortie: 6000 mm
10815 MALMEDIE EDR/33 Machine dresseuse et coupeuse pour barres d'âme
- matériel travaillé jusqu'à présent: électrodes
- Ø fil min: 1.6 mm
- Ø fil max: 5 mm
- longueur de coupe: 250 - 450 mm
- vitesse max: 375 m/min
10800 WAFIOS REL 3 machine à dresser et couper
- Ø fil min: 1.6 mm
- Ø fil max: 6 mm
- longueur de coupe: 450 cm
- longueur de la table de sortie: 450 mm
10797 WAFIOS RS 41 machine à dresser et couper
- Ø fil min: 1.6 mm
- Ø fil max: 6 mm
- longueur de coupe: 1.000 mm
- longueur de la table de sortie: 1.000 mm
10794 VITARI NR 2 S.0 machine à dresser et couper
- matériel travaillé jusqu'à présent: fil d'acier doux et dur
- Ø fil min: 2 mm
- Ø fil max: 6 mm
- vitesse max: 78 m/min
- longueur de la table de sortie: 4.000 mm