Type "extruder accessories"
12713 NOKIA-MAILLEFER OFC 52-636 advanced optical fiber coloring system
- material: all UV crosslinkable materials
- suitable for: for colouring fibre optics
- speed max: 1200 m/min
-
additional data:
Coating thickness: 3 - 6 micron
With: UV crosslinking system
Colouring system:
Operating pressure: 0 - 3,5 bar
Ink tank: 1,7 L
Scrap container: 4,0 L
Nominal ink film thickness: 4 - 6 Micron
Static unloader and dust remover: before coating
Protective gas system:
Nitrogen Flow rate: Adjustable 0.5 - 50 l/min
Oxygen content in quartz tube: less than 0.1%
Extraction:
Coil Ø: approx. 240 mm
Spool dimensions:
Spool-Ø max.: 450 mm
Spool -Ø min.: 150 mm
Spool width max.: 250 mm
Spool weight max.: 10 kg
Bobbin bore: 25.4 mm (1 inch)
Traversing payoff:
Tension: 0.2 - 1.0 N
Automatic shut-off: at fibre breakage or end of fibre
Traversing take up:
Tension: 0.2 - 1.0 N
lay length: 0.1 - 1.0 mm with 0.01 mm pitch
9445 CLINTON STB spark tester
- cable Ø min: 0.4 mm
- cable Ø max: 4.6 mm
- operation voltage: 240 V
- frequency: 50 - 60 Hz
8464 SM KLEBETECHNIK SM GD 33 2-2 grease filling device
- motor power: 2,4 + 9 kW
- operation voltage: 380 V
- frequency: 50 Hz
- pressure: 10 bar
- barrel Ø: 300 mm
8463 REGLOPLAS 90 S grease filling heating device
- motor power: 6,5 kW
- temperature: 90 °C
- barrel Ø: 450 mm
8243 GERCO VSF 250 feed pump
- motor power: 1,5 kW
- motor revolutions: 2.800 min⁻¹
- operation voltage: 400 V
8238 cooling trough
7816 CONAIR CS 151 dehumidifying dryer
- suitable for: drying of residual moisture in the granulate before extrusion
- air consumption: 120 m³
- drying temperature: 71 - 121 °C
7126 CONAIR CD-200 dehumidifying dryer
- suitable for: drying of residual moisture in the granulate before extrusion
- air consumption: 150 m³
- drying temperature: 71 - 121 °C
7123 CONAIR FRANKLIN 18010702 dehumidifying dryer
- suitable for: drying of residual moisture in the granulate before extrusion
7113 CONAIR FRANKLIN 18010702 dehumidifying dryer
- suitable for: drying of residual moisture in the granulate before extrusion
