Second-Hand Machines

12886 SAMP BM 630 DB double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12884 SAMP BM 630 D double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12882 SAMP BM/630-D double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet

12877 SKET SR 18x200 tubular strander

spool flange Ø max: 200 mm
single wire Ø min: 0,3 mm
single wire Ø max: 1 mm
lay length max: 81,5 mm
rotor revolutions: 1.500 min⁻¹

SKET pay-off
SKET haul-off capstan
SKET take-up
SKET electrical cabinet

12872 SKET SRN 6x400 tubular strander

spool flange Ø max: 400 mm
single wire Ø min: 0,8 mm
single wire Ø max: 2 mm
final rope Ø max: 10 mm
rotor revolutions: 1.400 min⁻¹

SKET pay-off
SKET double haul-off capstan
SKET take-up
SKET electrical cabinet

12868 WWM SS/W 2011 full automatic spooling line for welding wire

up to now used for: welding wire
technical condition: overhauled from company WWM in year 2020 for the value of EUR 77.000,-
wire Ø min: 0,8 mm
wire Ø max: 1,2 mm
speed max: 35 m/s

WWM SF1.1/W pay-off
WWM dancer
WWM electrical cabinet

12864 WWM SS/W 2011 full automatic spooling line for welding wire

up to now used for: welding wire
technical condition: overhauled from company WWM in year 2020 for the value of EUR 77.000,-
wire Ø min: 0,8 mm
wire Ø max: 1,2 mm
speed max: 35 m/s

WWM SF1.1/W pay-off
WWM CV.7/W dancer
WWM electrical cabinet

12859 KISTNER rewinding line

no. of spool reception: 12
wire Ø min: 1 mm
wire Ø max: 2 mm
spool flange Ø max: 800 mm
speed max: 120 m/min

KISTNER HA 800/12 pay-off, 12 stations
KISTNER HS 800/12 take-up, 12 stations
electrical cabinet

12854 GSG WBE 4 brush descaler

wire Ø min: 5,5 mm
wire Ø max: 12 mm
no. of brushes: 4
brush Ø: 250 mm
feeding speed max: 4 m/s

12853 GSG WEZ IIIA mechanical descaler

up to now used for: low and high carbon steel wire
wire Ø min: 5,5 mm
wire Ø max: 13,5 mm

12852 PEKA pay-off tower

12851 PEKA pay-off tower

12829 GCR Eurodraw brass wire plating line

up to now used for: high carbon steel wire up to 0,70 % carbon
no. of wires: 1
wire Ø min: 1,3 mm
wire Ø max: 3 mm
feeding speed max: 400 m/min

GCR Eurodraw SOM 800 spool pay-off
GCR Eurodraw dancer
GCR Eurodraw deflection pulleys
GCR Eurodraw electrolytic pickling
GCR Eurodraw rinsing
GCR Eurodraw Alkaline copper plating
GCR Eurodraw rinsing
GCR Eurodraw galvanzing
GCR Eurodraw rinsing
GCR Eurodraw Thermodiffusions-unit
GCR Eurodraw Phospahting unit
GCR Eurodraw rinsing
GCR Eurodraw deflection pulleys
GCR Eurodraw dancer
GCR Eurodraw RM 80 Spool take up

12827 SPIRKA DF 16 A braider

wire Ø min: 0,05 mm
type of operation: vertical
no. of pay-off bobbins: 16
coil section: 0,02 - 0,30 mm²
additional data: Braided weave: 2:2
Centre passage: -Ø15 mm
Maximum speed: 150 rpm
Spools: S1,-Ø75/23 x 100/50 mm, plastic, without snap ring
Motor power pay off capstan: 0.37 kW
Thread cut-off: yes
Single wire cut-off: yes
Metre counter: yes
Top bobbin carrier: DF16-550D
Bobbin carrier bottom: DF16-550E

KURRE KDWW-450/800-30/30 take-up and pay-off

12820 WAFIOS DF 32 chain link fencing machine

up to now used for: low carbon galvanised and PVC coatet
suitable for: Up to now used for:
Mesh width from: 0.50 m to 2.50 m
Spacing: 50 mm
Wire-Ø galvanised: 1.80 mm - 2.40 mm.
PVC-coated wire-Ø: 2.40 mm - 3.00 mm.
Length of compacted roll up to 30 metres
wire Ø min: 1.5 mm
wire Ø max: 3.1 mm
weaving width max: 2000 mm

WAFIOS AFD250 compact coil take-up

12812 NIEHOFF SNH 801.1.G.E. single spooler

up to now used for: Cu, Al
spool flange Ø min: 630 mm
spool flange Ø max: 800 mm
examples of production: wire Ø min 8 x 0,15 mm
wire Ø max 24 x 0,40 mm
speed max: 35 m/s

NIEHOFF VP 100 dancer

12803 FUHR K 11902 rolling mill

suitable for: previously used for rolling rombic cross sections
no. of stands: 2
wire Ø max: 2 mm
speed: 200 m/min
additional data: The rolling mill was originally designed to roll copper alloys.
In year 2016, the rolling mill was converted for the rolling of stainless-steel wire from company Fuhr and a new drag rolling stand was added to the line as part of this process.

Mobac MB300 pay-off
FUHR double haul-off capstan
FUHR dancer
FUHR WSR 140-Mo dou rolling stand
FUHR dancer
FUHR WSN 112 Drag roller
FUHR double haul-off capstan
FUHR dancer
FUHR SMH 630-Mo/O take-up

12799 steel spool

spool flange Ø: 630 mm
spool core Ø: 355 mm
spool useful width: 400 mm
total spool width: 475 mm
spool bore Ø: 127 mm

12793 HAGEN & FUNKE EWW 6 double spooler

suitable for: 0.08 mm² - 6 mm², 0.8 - 4.5 mm
wire Ø min: 0,8 mm
wire Ø max: 4,5 mm
spool flange Ø max: 630 mm
speed max: 400 m/min

HAGEN & FUNKE ST 3-300 P dancer
HAGEN & FUNKE DS 3 double haul-off capstan

12792 HAGEN & FUNKE DÜKA 630 double overhead-type pay-off

up to now used for: copper wire
spool flange Ø max: 630 mm
number of pay-off stations: 2
pay-off turn table driven: yes