Second-Hand Machines

machine category
manufacturer

HERBORN GHST/5-G/3 cold rolling line 10668

  • inlet wire Ø max: 12 mm
  • finished wire Ø min: 3,4 mm
  • finished wire Ø max: 10 mm
  • speed max: 10 m/s
  • up to now used for: low carbon wire
Details

WAFIOS HDS 33 hexagonal mesh weaving machine 10667

  • pitch max: 25 mm
  • weaving width max: 3.300 mm
  • up to now used for: low carbon wire
  • operation voltage: 380 V
  • frequency: 50 Hz
Details

SAMP BM 630 D double twist bunching machine 10666

  • cross section of core max: 6 mm²
  • twists per minute: 6000
  • take-up spool flange Ø: 630 / 400 mm
  • cross section of core min: 0,10 mm²
  • up to now used for: Cu, bare
Details

SAMP BM 630 D double twist bunching machine 10665

  • cross section of core max: 6 mm²
  • twists per minute: 6000
  • take-up spool flange Ø: 630 / 400 mm
  • up to now used for: Cu, bare
  • type of drive: DC motor
Details

SAMP BM 800 D double twist bunching machine 10664

  • cross section of core max: 16 mm²
  • twists per minute: 5000
  • take-up spool flange Ø: 800 mm
  • cross section of core min: 0,50 mm²
  • up to now used for: Cu, bare
Details

SAMP BM 800 D double twist bunching machine 10663

  • cross section of core max: 16 mm²
  • twists per minute: 5000
  • take-up spool flange Ø: 630 / 800 mm
  • cross section of core min: 0,50 mm²
  • up to now used for: flexible conductor
Details

RENTROP & RAHMER compacting / tying machine 10662

  • coil inside Ø: 710 mm
  • clamping: hydraulic
  • tiltable: yes
  • operation voltage: 380 V
  • frequency: 50 Hz
Details

HERBORN GG 20/2+GG 16/2 + GT 16/5 straight-line drawing machine 10660

  • total no. of dies: 9
  • inlet wire Ø max: 12,7 mm
  • finished wire Ø min: 2,2 mm
  • block Ø: 600 mm
  • up to now used for: Al and Al alloys
Details

steel spool 10656

  • spool flange Ø: 750 mm
  • total spool width: 500 mm
  • spool capacity max: 780 kg
  • no.: 10
  • spool material: steel
Details

Ramatech UWA 2800/8000 rewinding line 10653

  • spool flange Ø max: 2800 mm
  • spool flange Ø min: 900 mm
  • spool capacity max: 8000 kg
  • cable Ø max: 50 mm
  • up to now used for: insulated cores
Details

SICME 2SEL-575-4BCX-T10/23-R11 enamelling line 10652

  • number of passes/wires: 4
  • number of courses: 17
  • wire Ø min: 0,23 mm
  • wire Ø max: 0,5 mm
  • up to now used for: enamelled Cu wire
Details

VITARI NR 230 wire straightening and cutting machine 10648

  • wire Ø max: 10 mm
  • speed max: 130 m/min
  • outlet table length: 3500 mm
  • wire Ø min: 4 mm
  • up to now used for: low carbon and high carbon steel wire
Details

MEP BT 4-12 cold rolling line 10646

  • inlet wire Ø max: 14 mm
  • finished wire Ø min: 4 mm
  • finished wire Ø max: 12 mm
  • inlet wire Ø min: 5,5 mm
  • up to now used for: Bewehrungsstahl- und glatter Stahldraht
Details

steel spool 10644

  • spool flange Ø: 630 mm
  • total spool width: 475 mm
  • no.: 3
  • spool core Ø: 355 mm
  • spool useful width: 400 mm
Details

barrel 10643

  • no.: 142
  • barrel material: steel
  • barrel outside Ø: 1000 mm
  • suitable for: for static coiler typ: Herborn WF 800 / Niehoff 800
  • up to now used for: Cu wire
Details

NIEHOFF MMH121.E2.1.A.14.2618 wet-type multiwire drawing machine 10635

  • no. of wires: 14
  • total no. of dies: 19
  • inlet wire Ø max: 14 x 2,59 (14 x 10 AWG) mm
  • finished wire Ø min: 14 x 0,32 (14 x 28 AWG) mm
  • finish-diameter - max.: 14 x 0,812 (20 AWG) mm
Details

LESMO DTO 1250 CM double twist bunching machine 10633

  • spool flange Ø max: 1200 mm
  • Bunching of flexible 7 starnds / conductor: with cross section from 10 to 70 mm²
  • Stranding of 7 wires: aluminium compacted strands from 6 to 70 mm²
  • Stranding of 7 wires: copper compacted strands from 6 to 50 mm²
  • up to now used for: Cu, bare and insulated conductors
Details

SKET SRN 8 x 630 tubular strander 10629

  • total no. of bobbins: 8
  • spool flange Ø max: 630 mm
  • material Ø min: 4,85 mm
  • material Ø max: 160
  • rotor revolutions: 500 min-1
Details

KRUPP SVK 1 + 6/900 tubular strander 10628

  • total no. of bobbins: 6
  • spool flange Ø max: 915 mm
  • rope-Ø min.: 10 mm
  • rope-Ø max.: 28 mm
  • up to now used for: high carbon wire
Details

SKET MKVD 12 -2 4 x 560 cage strander with backtwist 10627

  • spools per cage: 12 + 24
  • spool flange Ø max: 590 mm
  • cable Ø max: 38 mm
  • cable Ø min: 14 mm
  • single wire Ø min: 1,1 mm
Details